Different speaker cable lengths – does it actually matter? If you are at all interested in home theatre equipment then you will no doubt be aware that you will find a huge argument regarding how long the speaker cables between several speakers actually has to be. There’s a lot of misinformation around that has led many individuals to imagine that the length of the Cayin 300B must be kept identical, or at least almost identical, to avoid time delays and phase problems.
Conduct a quick search for any audio-visual forum or website and you will see that just about the most common questions is approximately differences in speaker cable lengths. It’s time and energy to settle this problem, and this article aims to tell you why people think that they have to keep the length of their speaker cables identical, and maybe most importantly, why the notion that cables must be exactly the same length is actually a total myth.
Lots of this is dependant on the makers who sell exotic speaker cables. Promoting the concept that all runs of cable need to be the identical length helps the manufacturers to produce a false sense of expertise in the eyes consumers, all things considered, the organization that makes the cable is definitely going to understand what these are speaking about, and when they claim that cable lengths ought to be identical then surely it must be true, right? Obviously, it also helps the manufacturer to promote more cable because consumers will happily buy more cable compared to they actually need.
Similar to most myths about technology, once a few people happen to be told the Audiophile Cables ought to be the same length it soon becomes widespread and you will see people preaching this concept through the entire audio-visual community.
Let’s get this cleared up for good: differences in the size of your speaker cables doesn’t matter one bit. There exists virtually no good reason why the runs of cable between your speakers must be kept to identical lengths. So just why do so many individuals argue that there exists? Well it’s simply right down to misinformation and misunderstanding.
The main argument to keep speaker cable runs the identical length is that it really helps to avoid any delays or phase problems which may otherwise occur. Now, there exists actually some truth behind the notion that cable length may cause delays – obviously it takes slightly longer for any signal to travel along a cable which is a few hundred feet long compared with a cable that is just 2 or 3 feet long.
On the face from it you might be inclined to accept the argument that every speaker in your body should be fed by a cable which is the same length, that way you can be certain that all of your speakers have the signal at exactly the qzuqtl time and you will definitely therefore avoid any delays or phase issues.
The issue with this particular argument though is the fact that typical home theatre installations have this type of small-scale that different lengths of speaker cable make simply no impact in any way! To ensure that this to be relevant we would need to be coping with cables that have been over 500 feet long, as well as then the variations in signal delay would still be unnoticeable to the majority of people. That being the case, there is absolutely no trouble with using speaker cables of different lengths.
So the very next time someone attempts to inform you that you ought to maintain your runs of cable the identical length feel free to ignore them! In fact typically it’s usually preferable to keep Line Magnetic as short as is possible, which certainly makes it less expensive since you are only buying the amount of cable that you simply really need. Just be sure you keep your cable for enough time to travel around furniture, or around the side of the area if needed.